Eye-One Display 2: Specifications

Home • Reviews • Forums • News 2015 • 2013 • 2012 • 2009 • 2008 • 2007 • 2006 • 2005 • 2004
RSS Feeds • FOV Factor Table • Sensor Sizes | Definitions: A-D • E-H • I-L • M-P • Q-U • V-Z | Sitemap
Articles • Archived Websites (Pre-DigitalDingus): D100 Lounge • E-10 Club | Contact

Eye-One Display 2 by GretagMacbeth
Specifications December 4, 2006
Eye-One Display 2 Introduction • What's In The Box / Closer Look Eye-One Display 2 Monitor Calibration • Monitor Calibration (Part 2) • Monitor Calibration (Part 3) Eye-One Display 2 Specifications • Eye-One Display 2 Conclusion
General
Interface	USB* data and power supply Data format: luminance Y*: cd/m2chroma: x, y (CIE XYZ, according to CIE 1931)
Refresh Rate	Monitor frequencies: 40 Hz to 150 Hz
Cycle Time	Time per measurement: typical 1 second per patch
Physical Dimensions	Length 84mm, width 64 mm, height 35mm (3.3 x 2.5 x 1.4 in)
Weight	90g (3.1 oz) (without counterweight attached)
Performance
Dynamic Range	Black point: 0.05 cd/m2 White point: up to 1,000 cd/m2
Accuracy (LCD)	Luminance: Y: typical +/- 2% Chroma x,y: typical +/- 0.006
Accuracy (CRT)	Luminance: Y: typical +/- 2% Chroma x,y: typical +/- 0.004
Repeatability	Luminance: Y: typical +/- 1% Chroma x,y: typical +/- 0.002
Color Temperature	CCT range: typical 4000K to 120000K accuracy: typical +/- 250K CCT = Correlated Color Temperature
Measurement Conditions
The above are specifications of the Eye-One Display where: Sensor is housed in CL skins with proper adapter attached for measurement Accuracy values are given relative to the NIST-certified reference at manufacturer Repeatability measurements are stated for same-sensor/no-dismount situation All measurements are dark current corrected Room temperature of 20 degrees C, +/- 5 degrees CRT display is set to white of D50 (x.346, y.359) in a darkened room, luminance is set to 80 cd/m2 or greater at full white, an EBU or P22 phosphor set LCD display is set to white of D65 (x.313, y.329) in a darkened room, luminance is set to 120 cd/m2 or greater at full white
System Requirements
Macintosh Mac OS X (10.2 or higher) Apple ColorSync 3.03 or higher 128 MB of available RAM 80 MB of available hard disk space Monitor resolution of 1024 x 768 pixels or higher USB support Windows Windows 2000 or XP Processor: Pentium II, 266 Mhz or higher 128 MB of available RAM 80 MB of available hard disk space Monitor resolution of 1024 x 768 pixels or higher USB support